10G NIC performance: VFIO vs virtio

We did some experiment trying to measure network performance overhead in virtualization environment, comparing between VFIO passthrough and virtio approaches.

Test Topology

2 Intel Grantley-EP platforms (Xeon E5-2697 v3) connected by 10G link; memory 96 G.
NIC: Intel 82599ES
Test Tool: iperf
OS: RHEL 7.1

Result summary

• In native environment, iperf can get 9.4 Gbps throughput. Since iperf is a SW packet generator and normal process shall it be, this a reasonable number.
• With VFIO passthrough, network performance is also 9.4 Gbps; i.e., we cannot observe overhead in virtualization environment with VFIO passthrough method, in context of typical SW network user application.
• With virtio approach, if proper configured (details see below), network performance can also achieve 9.4 Gbps.

---

Here is the details about each kind of configuration.

VFIO passthrough VF (SR-IOV) to guest

Requirements

1. You NIC supports SR-IOV (how to check? see below)
2. driver (usually igb or ixgb) loaded with 'max_vfs=<num>' (better to modinfo to check accurate parameter name)
3. kernel modules needed: NIC driver, vfio-pci module, intel-iommu module

Check if your NIC supports SR-IOV

lspci -s <NIC_BDF> -vvv | grep -i "Single Root I/O Virtualization"

Assign the VF to a guest

Unbind from igbvf driver and Bind to VFIO driver

1. unbind from previous driver (take igbvf device for example)

   echo <vf_BDF> > /sys/bus/pci/device/<vf_BDF>/driver/unbind

   lspci -s <vf_BDF> -n //to get its number

   //it will return like below

   0a:13.3 0200: 8086:1520 (rev 01)

   //8086 1520 is its numeric number

2. bind to vfio-pci driver

   echo 8086 1520 > /sys/bus/pci/drivers/vfio-pci/new_id

Now you can see this device is bound to vfio-pci driver
lspci -s <vf_BDF> -k

Create guest with direct passthrough via VFIO framework
qemu-kvm -m 16G -smp 8 -net none -device vfio-pci,host=81:10.0 -drive file=/var/lib/libvirt/images/rhel7.1.img,if=virtio -nographic
'-net none' tells qemu not emulate network devices
'-device vfio-pci,host=' designate a vfio-pci device and the device's host BDF

Virtio

Requirements

virtio compiled in kernel (RHEL7.1 native kernel already have them) CONFIG_VIRTIO=m CONFIG_VIRTIO_RING=m CONFIG_VIRTIO_PCI=m CONFIG_VIRTIO_BALLOON=m CONFIG_VIRTIO_BLK=m CONFIG_VIRTIO_NET=m

Create guest with direct passthrough via VFIO framework
qemu-kvm -m 16G -smp 8 -device virtio-net-pci,netdev=net0 -netdev tap,id=net0,script=/etc/qemu-ifup -drive file=/var/lib/libvirt/images/rhel7.1.img,if=virtio –nographic

Poor performance configuration

qemu-kvm -m 16G -smp 8 -net nic,model=virtio -net tap,script=/etc/qemu-ifup -drive file=/var/lib/libvirt/images/rhel7.1.img,if=virtio –nographic
If not use '-device virtio-net-pci' option, performance will be 3.6 Gbps.