WindowsGuestDrivers/kvmnet/registry

This page describes best practice for configuring Windows TCP\IP related parameters to archive the best performance with Windows guests. Those parameters are unrelated to kvm\VirtIO drivers , rather general Windows settings. After changing those setting reboot is required for the changes to effect the system.

Windows XP and 2003 registry settings

Registry settings

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\AFD\Parameters]

"DefaultSendWindow"=dword:00100000

"DefaultReceiveWindow"=dword:00100000

"FastSendDatagramThreshold"=dword:00004000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters]

"Tcp1323Opts"=dword:00000001

"TcpWindowSize"=dword:00100000

• Tcp1323Opts - allows the scaling of the TCP window above 16k. For more info read Tcp1323Opts
• "DefaultSendWindow", "DefaultReceiveWindow" and "TcpWindowSize" control TCP window size
• "FastSendDatagramThreshold" - controls fast UDP transmit.

Additional links

• Windows Sockets and DNS Registry Parameters
• Server Does Not Use All Bandwidth Available When Streaming Files with Bit Rates over 100 Kbps

Starting from Vista

Starting from Windows Vista the mentioned above setting are not effecting Windows networking stack.

netsh configuration tool should be used to configure the networking settings.

Disable Windows Scaling heuristics

Starting from Windows Windows Vista, Windows can disregard user TCP Windows setings. This behavior could be desabled:

netsh int tcp set heuristics disabled

   possible settings are: disabled,enabled,defaul

The corresponding Registry value (not necessary to edit if setting via netsh) is located in: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Tcpip\Parameters EnableWsd=0 (default: 1, recommended: 0)

TCP Auto-Tuning

To turn off the default receive window auto tuning behavior:

   netsh int tcp set global autotuninglevel=disabled

The default auto-tuning level is "normal", possible settings are:

   disabled: uses a fixed value for the tcp receive window. Limits it to 64KB.
   highlyrestricted: allows the receive window to grow beyond its default value, very conservatively.
   restricted: somewhat restricted growth of the tcp receive window beyond its default value.
   normal: default value, allows the receive window to grow to accommodate most conditions.
   experimental: allows the receive window to grow to accommodate extreme scenarios (It enables RWIN values of over 16 MB).

Compound TCP

To increase the TCP Windows with the faster rate Compound TCP should be enabled. On Vista and Windows 7, CTCP is off by default. On Windows 2008 it is on.

To enable CTCP:

   netsh int tcp set global congestionprovider=ctcp

To disable CTCP:

   netsh int tcp set global congestionprovider=none