KVM-Autotest/TODO: Difference between revisions

From KVM
No edit summary
No edit summary
Line 3: Line 3:
== Framework ==
== Framework ==


* <s>Verify MD5 sum of ISO image before starting a VM</s> [Michael] [DONE]
* kickstart installation support [Lucas] [Nearly DONE]
* <s>Enable multiple user controlled port redirections (with -redir)</s> [Michael] [DONE]
* <s>Implement functions to translate VM ports and addresses (e.g. VM.get_port(), VM.get_address())</s> [Michael] [DONE]
* <s>Support TAP networking with a user specified MAC address for each NIC</s> [Michael] [DONE]
* <s>Add <tt>display</tt> parameter to enable user control of the QEMU display method (VNC/SDL/nographic)</s> [Michael] [DONE]
* <s>Implement VM.clone() -- to be used by tests that need to add new VMs by themselves</s> [Michael] [DONE]
* kickstart installation support
* kvm-autotest auto resolve qemu-kvm backtraces
* kvm-autotest auto resolve qemu-kvm backtraces
* <s>Make sure ppm_utils.image_crop() handles bad input properly</s> [Michael] [DONE]
* <s>Enable tests to modify a VM's params (while it's down)</s> [Michael] [DONE]
* <s>Make tests shorter by using small utility functions that fail a test and display a failure message</s> [Michael] [DONE]
* <s>Improve the stepmaker data naming system (e.g. name PPM files according to their MD5 sums)</s> [Michael] [DONE]
* Redirect guest monitor to serial and capture guest error messages written to console. Log the errors and also scan for specific problems (e.g. oops)
* Redirect guest monitor to serial and capture guest error messages written to console. Log the errors and also scan for specific problems (e.g. oops)
* Support an "expected to fail" param (at least in our html report)
* Support an "expected to fail" param (at least in our html report)
Line 22: Line 12:
* Fail upon indentation/white-space problems in the configuration file
* Fail upon indentation/white-space problems in the configuration file
* Add a way to shutdown the VMs when the whole job completes (compared to doing nothing or shutting-down after every test) [Michael]
* Add a way to shutdown the VMs when the whole job completes (compared to doing nothing or shutting-down after every test) [Michael]
* <s>Implement <tt>include</tt> functionality in the config file parser</s> [Michael] [DONE]
* <s>Implement kvm_spawn.get_command_status_output() to make sending SSH commands easier</s> [Michael] [DONE]
* <s>Config file parser: enable selective modification of parameters based on regular expressions, e.g. mem.* ?= 256</s> [Michael] [DONE]
* <s>Support running user specified pre-job, post-job, pre-test and post-test scripts</s> [Michael] [DONE]
* <s>Make Step Editor accept a filename command line argument</s> [Michael] [DONE]
* <s>When running step files, detect frozen (stuck) guests even in the presence of a blinking cursor</s> [Michael] [DONE]
* Support running tests in parallel with multiple queues for each host [Michael]
* <s>Automatically convert PPM images in debug dirs to PNG format to save space</s> [Michael] [DONE]
* <s>Automatically assign a UUID to a VM (use the '-uuid' QEMU parameter). Once assigned, should be used in all dependent tests.</s> [jasowang] [DONE]
* <s>Automatically assign a MAC address to a NIC. Once assigned, should be used in all dependent tests.</s> [jasowang] [DONE]
* <s>Allow run_bg to track a child process's stdin and stderr even after the parent process has exited; achieved by merging run_bg with kvm_spawn</s> [Michael] [DONE]


== Tests ==
== Tests ==
Line 39: Line 17:
* Find out how to use Autotest's netperf test with guests [Yolkfull]
* Find out how to use Autotest's netperf test with guests [Yolkfull]
* If needed, write a netperf/iperf test [jasowang] [NEEDS MORE WORK]
* If needed, write a netperf/iperf test [jasowang] [NEEDS MORE WORK]
* <s>Write a time drift test (pic/apic/pm_timer)</s> [Michael] [DONE]
* <s>Write a test which adds VMs until one of them becomes unresponsive, and records the maximum number of VMs successfully started</s> [Yolkfull] [ALREADY DONE]
* cpu hotplug [Glauber]
* cpu hotplug [Glauber]
* pci net hot plug [Yolkfull]
* pci net hot plug [Yolkfull]
* pci block hot plug [Yolkfull]
* pci block hot plug [Yolkfull]
* <s>s3 hibernation</s> [Gleb] [DONE]
* <s>tap networking</s> [jasowang] [DONE]
* pxe boot * net types [jasowang]
* pxe boot * net types [jasowang]
* qcow1, qcow2, vmdk, vhd
* qcow1, qcow2, vmdk, vhd
* qcow2 internal snapshots
* qcow2 internal snapshots
* <s>Run autotest tests inside Linux guest</s> [Michael] [ALREADY DONE]
* Further migration [jasowang]
* Further migration [jasowang]
* Multiple nics [jasowang]
* Multiple nics [jasowang]
Line 67: Line 40:
* Pass through NICs / VFs to guest [Yolkfull]
* Pass through NICs / VFs to guest [Yolkfull]
* Different CPU flags support
* Different CPU flags support


== Misc ==
== Misc ==


* <s>Goal -- get accepted into upstream autotest</s> [DONE]
* Add docstrings to all functions that still lack them, including the ones in stepmaker.py, stepeditor.py and kvm_tests.py [Michael]
* Add docstrings to all functions that still lack them, including the ones in stepmaker.py, stepeditor.py and kvm_tests.py [Michael]
* <s>Add module headers and docstrings</s> [Michael] [DONE]
* Document the setupssh.iso and setuptelnet.iso creation procedures in the wiki
* Document the setupssh.iso and setuptelnet.iso creation procedures in the wiki
* Rename all Windows ISOs currently used to their official MSDN names
* Rename all Windows ISOs currently used to their official MSDN names
* <s>Move Windows-setup iso images into the windows directory.</s> [DONE]
* Share all the stepmaker data somehow so other people can debug stepfiles
* Share all the stepmaker data somehow so other people can debug stepfiles
* Fill the sections "Working with step files" and "Step file creation tips" in the wiki [Michael]
* Fill the sections "Working with step files" and "Step file creation tips" in the wiki [Michael]
* <s>Document the kvm_install test in the "Tests" section of the wiki</s>


== Bugs ==
== Bugs ==


* <s>Step Maker/Step Editor: fix the GDK MemoryError problem (do not pass gtk.gdk.pixbuf_new_from_data() a 0x0 pixmap even if a ppm file contains one)</s> [DONE]
* Please open bugs on the [[http://autotest.kernel.org/newticket autotest defect tracking system]]

Revision as of 17:17, 15 September 2009

KVM-Autotest To-Do list

Framework

  • kickstart installation support [Lucas] [Nearly DONE]
  • kvm-autotest auto resolve qemu-kvm backtraces
  • Redirect guest monitor to serial and capture guest error messages written to console. Log the errors and also scan for specific problems (e.g. oops)
  • Support an "expected to fail" param (at least in our html report)
  • Log a gdb-backtrace for tests (executables) which generate a core dump file.
  • Enable "guest-load" for a VMs before/while tests are running (e.g. migration of a VM, while a movie is playing on it) [Michael]
  • Add support for kvm-trace.
  • Fail upon indentation/white-space problems in the configuration file
  • Add a way to shutdown the VMs when the whole job completes (compared to doing nothing or shutting-down after every test) [Michael]

Tests

  • Find out how to use Autotest's netperf test with guests [Yolkfull]
  • If needed, write a netperf/iperf test [jasowang] [NEEDS MORE WORK]
  • cpu hotplug [Glauber]
  • pci net hot plug [Yolkfull]
  • pci block hot plug [Yolkfull]
  • pxe boot * net types [jasowang]
  • qcow1, qcow2, vmdk, vhd
  • qcow2 internal snapshots
  • Further migration [jasowang]
  • Multiple nics [jasowang]
  • multiple disks
  • ksm [jasowang, jzupka, ldoktor]
  • -vga stg, nographics
  • kvm unit-tests
  • Add unattended guest installations (using kickstart or answer-files) [jasowang]
  • kvm_install -- keep src and build directories under <kvm_autotest_root> instead of under kvm_runtest_2.
  • Stable tsc test - http://people.redhat.com/mingo/time-warp-test/MINI-HOWTO
  • Guest installation with pv-block device/driver (for both windows and Linux)
  • savevm test [jasowang]
  • Guests with large page support [jzupka, ldoktor]
  • Verify SMBIOS/DMI data (UUID, for example) [Yolkfull]
  • Disk serial number (for IDE, SCSI, VirtIO drives) [Yolkfull]
  • Test block device cancellation path using device mapper to generate errors ( after we had a crash in de_write_dma_cb)
  • Pass through NICs / VFs to guest [Yolkfull]
  • Different CPU flags support

Misc

  • Add docstrings to all functions that still lack them, including the ones in stepmaker.py, stepeditor.py and kvm_tests.py [Michael]
  • Document the setupssh.iso and setuptelnet.iso creation procedures in the wiki
  • Rename all Windows ISOs currently used to their official MSDN names
  • Share all the stepmaker data somehow so other people can debug stepfiles
  • Fill the sections "Working with step files" and "Step file creation tips" in the wiki [Michael]

Bugs

Retrieved from "https://linux-kvm.org/index.php?title=KVM-Autotest/TODO&oldid=2570"