KVM - User contributions [en]

TODO

2010-08-14T08:10:13Z

On2008nm: Emulate the VT and SVM instruction

=ToDo=

The following items need some love. Please post to the list if you are interested in helping out:

* Real mode support: VT support for real mode is terrible, so we need to do it in software. This means extending the x86 emulator (x86_emulate.c) to handle more instructions, and changing the execution loop to call the emulator for real mode (in progress).
* Emulate the architectural performance monitor counters/msrs, for Linux nmi watchdog support.
* Emulate MSR_IA32_DEBUGCTL for guests which use it
* Bring up Windows 95 and Windows 98 guests

The following smaller scale tasks can be a nice entry point to someone wishing to get involved:

* Store command line options in an empty snapshot in a qcow2 format image file. This allows an image file to be self contained: <code><nowiki>qemu file.img</nowiki></code> should be enough to launch a fully configured virtual machine. (this is probably a bad idea--see qemu-devel/kvm-devel discussion)
* Allow all cpuid features supported by kvm to be passed to the guest; add a command line option to specifiy the cpuid explicitly to allow migration in a heterogeneous server farm. (in progress)
* Reduce qemu memory footprint when using kvm
* Avoid taking kvm->lock when issuing mmio. Need to check lapic and ioapic accesses for correctness.

==== MMU related: ====
* Improve mmu page eviction algorithm (currently FIFO, change to approximate LRU).
* Add a read-only memory type.
** possible using mprotect()?
* Implement AM20 for dos and the like.
* Implement direct page tables on paravirt_ops enabled Linux guests
* O(1) write protection by protecting the PML4Es, then on demand PDPTEs, PDEs, and PTEs
* O(1) mmu invalidation using a generation number

==== x86 emulator updates: ====
* Add a NonPT flag (or maybe its inverse, Paging) to instructions that are never used for page table updates (like add, sub, call). Teach the mmu to unshadow page tables if a NonPT instruction is executed on them.
* Change the emulator initialization sequence not to read all segment registers (this is slow), instead read them on demand. On 64-bit, no segments are usually needed while on 32-bit only cs and ds are commenly required.

==== Interactivity improvements: ====
* If for several frames in a row a large proportion of the framebuffer pages are changing, then for the next few frames don't bother to get the dirty page log from kvm, but instead assume that all pages are dirty. This will reduce page fault overhead on highly interactive workloads.
* When detecting keyboard/video/mouse activity, scale up the frame rate; when activity dies down, scale it back down (applicable to qemu as well).

==== Pass-through/VT-d related: ====
* Implement an external module for the iommus, so that KVM VT-d works on old kernels.
* Implement Linux pci-stub module to “hide” pass-through device from host kernel’s device driver.
* Enhance KVM QEMU to return error messages if user attempts to pass-through unsupported devices:
** Devices with shared host IOAPIC interrupt
** Conventional PCI devices
** Devices without FLR capability
* QEMU PCI pass-through patch needs to be enhanced to same functionality as corresponding file in Xen
** Remove direct HW access by QEMU for probing PCI BAR size
** PCI handling of various PCI configuration registers
** Other enhancements that was done in Xen
* Host shared interrupt support
* VT-d2 support (WIP in Linux Kernel)
** Queued invalidation
** Interrupt remapping
** ATS

==== Bug fixes: ====
* Less sexy but ever important, fixing bugs is one of the most important contributions

==== For the adventurous: ====
* Emulate the VT and SVM instructions, so that kvm can run in a virtual machine. Test by running a VM in a VT guest in an SVM guest on VT hardware, as well as running a VM in an SVM guest in a VT guest on SVM hardware .
* Emulate the VT and SVM instruction sets on qemu. This would be very beneficial to debugging kvm ( working on this - kern.devel@gmail.com ).
* Keep this TODO up to date
* Add [http://www.cs.toronto.edu/~andreslc/xen-gl/ vmgl] support to qemu. Port to virtio. Write a Windows driver.

__NOTOC__

TODO

2010-08-14T08:09:08Z

On2008nm: Emulate the VT and SVM instructions

=ToDo=

The following items need some love. Please post to the list if you are interested in helping out:

* Real mode support: VT support for real mode is terrible, so we need to do it in software. This means extending the x86 emulator (x86_emulate.c) to handle more instructions, and changing the execution loop to call the emulator for real mode (in progress).
* Emulate the architectural performance monitor counters/msrs, for Linux nmi watchdog support.
* Emulate MSR_IA32_DEBUGCTL for guests which use it
* Bring up Windows 95 and Windows 98 guests

The following smaller scale tasks can be a nice entry point to someone wishing to get involved:

* Store command line options in an empty snapshot in a qcow2 format image file. This allows an image file to be self contained: <code><nowiki>qemu file.img</nowiki></code> should be enough to launch a fully configured virtual machine. (this is probably a bad idea--see qemu-devel/kvm-devel discussion)
* Allow all cpuid features supported by kvm to be passed to the guest; add a command line option to specifiy the cpuid explicitly to allow migration in a heterogeneous server farm. (in progress)
* Reduce qemu memory footprint when using kvm
* Avoid taking kvm->lock when issuing mmio. Need to check lapic and ioapic accesses for correctness.

==== MMU related: ====
* Improve mmu page eviction algorithm (currently FIFO, change to approximate LRU).
* Add a read-only memory type.
** possible using mprotect()?
* Implement AM20 for dos and the like.
* Implement direct page tables on paravirt_ops enabled Linux guests
* O(1) write protection by protecting the PML4Es, then on demand PDPTEs, PDEs, and PTEs
* O(1) mmu invalidation using a generation number

==== x86 emulator updates: ====
* Add a NonPT flag (or maybe its inverse, Paging) to instructions that are never used for page table updates (like add, sub, call). Teach the mmu to unshadow page tables if a NonPT instruction is executed on them.
* Change the emulator initialization sequence not to read all segment registers (this is slow), instead read them on demand. On 64-bit, no segments are usually needed while on 32-bit only cs and ds are commenly required.

==== Interactivity improvements: ====
* If for several frames in a row a large proportion of the framebuffer pages are changing, then for the next few frames don't bother to get the dirty page log from kvm, but instead assume that all pages are dirty. This will reduce page fault overhead on highly interactive workloads.
* When detecting keyboard/video/mouse activity, scale up the frame rate; when activity dies down, scale it back down (applicable to qemu as well).

==== Pass-through/VT-d related: ====
* Implement an external module for the iommus, so that KVM VT-d works on old kernels.
* Implement Linux pci-stub module to “hide” pass-through device from host kernel’s device driver.
* Enhance KVM QEMU to return error messages if user attempts to pass-through unsupported devices:
** Devices with shared host IOAPIC interrupt
** Conventional PCI devices
** Devices without FLR capability
* QEMU PCI pass-through patch needs to be enhanced to same functionality as corresponding file in Xen
** Remove direct HW access by QEMU for probing PCI BAR size
** PCI handling of various PCI configuration registers
** Other enhancements that was done in Xen
* Host shared interrupt support
* VT-d2 support (WIP in Linux Kernel)
** Queued invalidation
** Interrupt remapping
** ATS

==== Bug fixes: ====
* Less sexy but ever important, fixing bugs is one of the most important contributions

==== For the adventurous: ====
* Emulate the VT and SVM instructions, so that kvm can run in a virtual machine. Test by running a VM in a VT guest in an SVM guest on VT hardware, as well as running a VM in an SVM guest in a VT guest on SVM hardware ( working on this - kern.devel@gmail.com ).
* Emulate the VT and SVM instruction sets on qemu. This would be very beneficial to debugging kvm.
* Keep this TODO up to date
* Add [http://www.cs.toronto.edu/~andreslc/xen-gl/ vmgl] support to qemu. Port to virtio. Write a Windows driver.

__NOTOC__

TODO

2010-08-14T08:08:36Z

On2008nm: Emulate the VT and SVM instructions

=ToDo=

The following items need some love. Please post to the list if you are interested in helping out:

* Real mode support: VT support for real mode is terrible, so we need to do it in software. This means extending the x86 emulator (x86_emulate.c) to handle more instructions, and changing the execution loop to call the emulator for real mode (in progress).
* Emulate the architectural performance monitor counters/msrs, for Linux nmi watchdog support.
* Emulate MSR_IA32_DEBUGCTL for guests which use it
* Bring up Windows 95 and Windows 98 guests

The following smaller scale tasks can be a nice entry point to someone wishing to get involved:

* Store command line options in an empty snapshot in a qcow2 format image file. This allows an image file to be self contained: <code><nowiki>qemu file.img</nowiki></code> should be enough to launch a fully configured virtual machine. (this is probably a bad idea--see qemu-devel/kvm-devel discussion)
* Allow all cpuid features supported by kvm to be passed to the guest; add a command line option to specifiy the cpuid explicitly to allow migration in a heterogeneous server farm. (in progress)
* Reduce qemu memory footprint when using kvm
* Avoid taking kvm->lock when issuing mmio. Need to check lapic and ioapic accesses for correctness.

==== MMU related: ====
* Improve mmu page eviction algorithm (currently FIFO, change to approximate LRU).
* Add a read-only memory type.
** possible using mprotect()?
* Implement AM20 for dos and the like.
* Implement direct page tables on paravirt_ops enabled Linux guests
* O(1) write protection by protecting the PML4Es, then on demand PDPTEs, PDEs, and PTEs
* O(1) mmu invalidation using a generation number

==== x86 emulator updates: ====
* Add a NonPT flag (or maybe its inverse, Paging) to instructions that are never used for page table updates (like add, sub, call). Teach the mmu to unshadow page tables if a NonPT instruction is executed on them.
* Change the emulator initialization sequence not to read all segment registers (this is slow), instead read them on demand. On 64-bit, no segments are usually needed while on 32-bit only cs and ds are commenly required.

==== Interactivity improvements: ====
* If for several frames in a row a large proportion of the framebuffer pages are changing, then for the next few frames don't bother to get the dirty page log from kvm, but instead assume that all pages are dirty. This will reduce page fault overhead on highly interactive workloads.
* When detecting keyboard/video/mouse activity, scale up the frame rate; when activity dies down, scale it back down (applicable to qemu as well).

==== Pass-through/VT-d related: ====
* Implement an external module for the iommus, so that KVM VT-d works on old kernels.
* Implement Linux pci-stub module to “hide” pass-through device from host kernel’s device driver.
* Enhance KVM QEMU to return error messages if user attempts to pass-through unsupported devices:
** Devices with shared host IOAPIC interrupt
** Conventional PCI devices
** Devices without FLR capability
* QEMU PCI pass-through patch needs to be enhanced to same functionality as corresponding file in Xen
** Remove direct HW access by QEMU for probing PCI BAR size
** PCI handling of various PCI configuration registers
** Other enhancements that was done in Xen
* Host shared interrupt support
* VT-d2 support (WIP in Linux Kernel)
** Queued invalidation
** Interrupt remapping
** ATS

==== Bug fixes: ====
* Less sexy but ever important, fixing bugs is one of the most important contributions

==== For the adventurous: ====
* Emulate the VT and SVM instructions, so that kvm can run in a virtual machine. Test by running a VM in a VT guest in an SVM guest on VT hardware, as well as running a VM in an SVM guest in a VT guest on SVM hardware(working on this - kern.devel@gmail.com).
* Emulate the VT and SVM instruction sets on qemu. This would be very beneficial to debugging kvm.
* Keep this TODO up to date
* Add [http://www.cs.toronto.edu/~andreslc/xen-gl/ vmgl] support to qemu. Port to virtio. Write a Windows driver.

__NOTOC__